Key benefits Door frame on left and right only: Increased cabling area. No side bracers: Increased cabling area; sides are easy to drill and cut. Notches in the box base allow direct cabling via a DIN rail Boxes are supplied with fastening lugs as standard, at no extra cost IP65/IK9 protection rating
	These boxes are mainly used for installing electrical and electronic equipment in corrosive environments. They are suitable for most indoor and outdoor applications in damp, corrosive surroundings. Outstanding corrosion resistance

APPLICATIONS: Electricity distribution, street lighting, signalling, remote management, water treatment, etc.

Technical specifications:
Fibreglass-reinforced polyester box
Double-insulated (class II) box
IP 65 protection rating (as per EN 60529 )
IK 9 mechanical impact resistance (as per EN 50102)
Self-extinguishing
Electrically insulating material
Non moisture-absorbing material
Withstands extreme temperatures: –30°C to +120° C
180° door opening to left or right




Accessories included as standard:
Box body includes moulded canopies at top and bottom
Inserts and 25 mm notches in the box base allow direct attachment to rails using standard hex-head screws Cf. 6
Condemned by quarter-turn two-bar lock - Cf. 5
Set of 4 polyamide wall-mounting tabs - Cf. 1
Door drilling grid - Cf. 8
Polyurethane door seal moulded in situ - Cf. 3
Corrosion-resistant Zamac hinges - Cf. 2

Optional accessories:
Solid or perforated galvanised steel or polyester mounting plate - Cf. 4
Transparent door
Door inserts for mounting accessories - Cf. 3
Other condemnation systems: Ronis quarter-turn key lock, triangle, etc. - Cf. 5
Pivoting internal panel
Modular frame
Notched bar-based system allowing the installation of multiple depth-adjustable plates - Cf. 7
Pillar-mounting system
Aeration and ventilation grille

DIMENSIONS:

References		Dimensions in mm			Set of 2 chicane-type ø30 mm aerators
Solid door	Door + visual	Height	Width	Depth
		A	B	C
030202	030202 T	300	250	160	DRG
040302	040302 T	400	300	200	DRG
050402	050402 T	500	400	200	DRG
060502	060502 T	600	500	250	DRG
080603	080603 T	800	600	300	DRG

Plates			Notched bars	Modular distribution	Pivoting plastron
Solid galv steel	Perforated galv steel	Polyester
PEM 0302	PEF 0302	PEP 0302	-	-	PPV 250
PEM 0403	PEF 0403	PEP 0403	PDP 200	CH 43	PPV 300
PEM 0504	PEF 0504	PEP 0504	PDP 200	CH 54	PPV 400
PEM 0605	PEF 0605	PEP 0605	PDP 250	CH 65	PPV 500
PEM 0806	PEF 0806	PEP 0806	PDP 300	CH 86	PPV 600

Centre-to-centre plate mounting dist.		Max. cabling area		Centre-to-centre box mounting dist. with 4 tabs				Usable depth
D	E	F	G	H	I	J	K	W
234	162	260	205	234	207	317	288	192
338	210	350	270	330	255	416	335	192
438	310	455	365	432	353	513	435	192
534	406	550	460	528	452	615	530	242
734	505	750	570	727	548	810	630	292